What Interface Does LCD Display Use?

Aug 20, 2025

Leave a message

                                                                              What interface does LCD display use?

With the increasing convenience of electronic products, people spend more and more time on electronic products. Videos and pictures are the mediums for conveying information, and the carriers for conveying information on good screens.

What interface should be used to better light up and battery life?

                                                news-554-435

Different screen adapters are also different, let me tell you today. What are the interfaces for LCD displays?

01RGB interface

                                               news-554-554

(1) Interface definition

RGB color is a color standard in the industry. RGB obtains various colors through the changes of the three color channels of red, green and blue and their superposition between them. This standard includes almost all colors that human vision can perceive, and is one of the most widely used color systems at present.

(2) Interface features

The interface is generally 3.3V electric frequency

Need to synchronize the signal

Image data needs to be refreshed at all times

Proper timing needs to be configured

(3) Maximum resolution and clock frequency

Parallel RGB interface:

Resolution: 1920*1080

Clock frequency: 1920108060*1.2 = 149MHZ

Serial RGB interface:

Resolution: 800*480

Clock frequency: 8003480601.2 = 83MHZ

02LVDS interface

                                               news-554-554

(1) Interface definition

LVDS, or Low Voltage Differential Signaling, is a low voltage differential signaling technology interface. It is a digital video signal transmission method developed by the American NS company to overcome the shortcomings of large power consumption and large EMI electromagnetic interference when transmitting broadband high-code rate data at TTL level. The IVDS output interface uses very low voltage swing to transmit data through differentials on two PCB traces or a pair of balanced cables. The LVDS output interface can enable the signal to be transmitted at a rate of hundreds of Mbit/s on differential PCB lines or balanced cables. Due to the low voltage and low current driving methods, low noise and low power consumption are achieved.

(2) Interface type

6-bit LVDS output interface

In the interface circuit, a single-channel transmission is used, and each primary color signal uses 6-bit data, with a total of 18-bit RGB data. Therefore, it is also called an 18-bit or 18-bit LVDS interface.

Dual 6-bit LVDS output interface

In the interface circuit, the transmission is carried out by dual-channel mode, and each primary color signal uses 6-bit data, of which the odd-channel data is 18-bit and the even-channel data is 18-bit, and a total of 36-bit RGB data. Therefore, it is called a 36-bit or 36-bit LVDS interface.

Single 8-bit LVDS output interface

In the interface circuit, a single-channel transmission is used. Each primary color signal uses 8-bit data, with a total of 24-bit RGB data, which is called a 24-bit or 24-bit LVDS interface.

Dual 8-bit LVDS output interface

In the interface circuit, it is transmitted in a dual way. Each primary color signal uses 8-bit data, of which the odd-channel data is 24 bits and the even-channel data is 24 bits, and a total of 48 bits of RGB data is called a 48-bit or 48bit LVDS interface.

(3) Interface features

High speed (usually 655Mbps)

Low voltage, low power consumption, low EMI (swing 350mv)

Strong anti-interference ability, differential signal

(4) Resolution

Single channel: 1280*800@60fps

Dual route: 1920*1080@60fps

03MIPI interface

                                           news-554-554

(1) MIPI definition

The MIPI Alliance defines a set of interface standards that standardizes the interfaces inside mobile devices such as cameras, displays, basebands, RF interfaces, etc., which increases design flexibility while also reducing costs, design complexity, power consumption and EMI.

(2) MIPI features

High speed: 1Gbps/Lane, 4Gbps throughput

Low power consumption: 200mV differential swing and common mode voltage

Noise suppression

Less pins, PCB layout is more convenient

(3) Resolution MIPI-DSI: 2048*1536@60fps

(4) MIPI-DSI mode

Command Mode

The MIPI-DBI-2 corresponding to the parallel interface has a frame buffer and flushes the screen based on the command set of DCS, similar to the CPU screen.

Video mode

Corresponding to the parallel interface MIPI-DPI-2, the screen flush is based on timing control, similar to the RGB synchronization screen

04HDMI interface

                                                   news-554-554

(1) Interface definition

High-Definition Multimedia Interface (High-Definition Multimedia Interface)

Digital interface, transmitting video and audio simultaneously

Transfer of uncompressed video data and compressed uncompressed digital audio data

Development history

                              news-746-310

In April 2002, a total of seven companies, including Hitachi, Panasonic, Philips, Silicon lmage, Sony, Thomson and Toshiba, established an HDMI organization and began to develop new interfaces dedicated to digital video/audio transmission standards.

(3) HDMI features

Transition Minimized Differential Signa

8bit~10bit DC balanced encoding, transmitting 10bit data per clock cycle.

EDID and DDC

Only connect between devices

Transfer Video and Audio

Lower cost, more convenient connection

HDCP

High-Bandwidth Digital Content Protection

(4) HDMI interface type

(Type A)

HDMI A Type is the most widely used HDMI cable with a total of 19pin interfaces, a width of 13.9mm and a thickness of 4.45mm. Most of the common flat panel, TV or video-playing devices in daily life are equipped with this interface.

(Type B)

HDMI B Type is rare in life. The interface adopts 29pin and has a width of 21mm. The data transmission capability of HDMI B Type is nearly twice as fast as HDMI A type, equivalent to DVI Dual-Link. In daily life, most audio and video equipment require operating frequency below 165MHz, while the operating frequency of HDMI B Type is above 270MHZ. It is somewhat overloaded in daily life, so it is mostly used for communication display equipment in professional fields.

(Type C)

HDMI C Type is often called Mini HDMI, which is mainly designed for small electronic devices. HDMI C Type also uses 19pin, a width of 10.42 mm and a thickness of only 2.4 mm, but is nearly 1/3 smaller than HDMI A Tyoe. It is commonly used in portable devices, namely mobile phones, digital cameras, portable players and other devices.

(Type D)

HDMI D Type is commonly known as Micro HDMI. It adopts a dual-row pin design, also 19pin, with a width of 6.4mm and a thickness of 2.8mm. It is very similar to the Mini USB interface, suitable for portable and on-board devices.

(Type E)

HDMI E Type is mainly used for audio and video transmission of in-car entertainment systems. Due to the particularity of the application scenario, this type requires characteristics such as earthquake resistance, moisture resistance, high strength resistance, and large temperature difference tolerance range in design. In terms of physical structure, a mechanical locking design is adopted to ensure contact reliability.

Send Inquiry