How to solve the light failure of LCD backlight source?

Aug 18, 2022

Leave a message

When installing the LCD backlight, pay attention to controlling the current and voltage. When customizing the LCD backlight, you can first determine the quality of the LED lights, and then the manufacturer will send samples to confirm the effect, to ensure that the quality is qualified, and then mass customization.


Regarding the problem of how to solve the problem of light decay of the LCD backlight, the editor analyzed that there are two reasons, one is the problem of LED lights, and the other is due to errors in the use or installation process. If the quality of the internal grains of the LED lamp is poor, the brightness will weaken faster, resulting in light decay; or during the production process, the LED cannot be dissipated from the metal PIN, which will cause the LED temperature to be too high and directly burn. When it is turned off, it will be found that the backlight of the LCD LCD screen has faded when it is lit again.


The second possible reason is that there is an error in the process of installation or use. In fact, there are many reasons that can cause the light decay of the backlight, but in the final analysis, it is due to the problem of overheating, and its heat dissipation is very important. It will cause the LED lamp to burn out, resulting in light decay; in addition to heat dissipation, silver glue and gold wires on the backlight will affect the brightness of the LED and cause light decay.


Send Inquiry