comparison of product parameters
|
LCM interface
|
Connector 30Pin_1.0mm, LVDS interface
|
LCD Type
|
IPS, TFT LCD
|
|
CTP interface
|
COB structure, IIC interface
|
Viewing Angle
|
Wide viewing angle, 85°/85°/85°/85°(L/R/U/D)
|
|
User interface
|
8Pin_2.0mm socket for power supply and serial communication.
Download rate(typical value): 12KByte/s
|
Resolution
|
1280×800 pixels
(support 0°/90°/180°/270°)
|
|
RS485 interface
|
2Pin_ 2.0mm horizontal socket: For RS485 communication
|
Color
|
24-bit 8R8G8B
|
|
Flash
|
32MBytes NOR Flash, for fonts, pictures and audio files.
Rewrite cycle: over 100,000 times
|
Backlight Mode
|
LED
|
|
Buzzer
|
3V passive buzzer. Power: <1W
|
Backlight Service Life
|
>30000 hours (Time of the brightness decaying to 50% on the condition of
continuous working with the maximum brightness)
|
|
SD interface
|
FAT32. Download files by SD interface can be displayed in statistics.
Download rate: 4Mb/s
|
Brightness
|
600nit
|
|
Touch Mode
|
Support point touch and drag
|
Brightness Control
|
0~100 grade (When the brightness is adjusted to 1%~30% of the maximum
brightness, flickering may occur and is not recommended to use in this range)
|
|
Surface Hardness
|
6H
|
Touch Type | 2*1.35A |
|
Light Transmittance
|
Over 90%
|
Structure
|
G+G structure with surface cover of tempered glass
|
Product Basic Information

Model:
Custom 12.1" Smart UART HMI (Fully customizable – resolution, interface, brightness, etc.)
Resolution:
1280×800 pixels (WXGA), supports 0°/90°/180°/270° rotation in software.
Display Type:
IPS TFT LCD, 24-bit true color (16.7M colors)
Viewing Angle:
Full 85°/85°/85°/85° (Left/Right/Up/Down) – looks perfect from any angle
Brightness:
600 cd/m² (600 nits) – daylight visible even in bright factories
Touch Panel:
G+G capacitive touch with tempered glass cover, supports multi-point touch and drag gestures
I've been in the LCD game for over 15 years, and what kills most projects is spending weeks writing display drivers.
With this 12.1 inch UART LCD display, you literally send ASCII or hex commands over serial – "show picture 001", "draw button at x,y", "play sound 01" – done. The onboard GUI kernel handles anti-aliased fonts, animations, transparency, and even curve graphing in real time.
Super Easy Development
No need to learn LVDS timing or complex MCU graphics libraries. Just a few UART commands and you're building professional-looking interfaces in hours.
Massive Onboard Storage
32MB Flash means you can store hundreds of full-screen images, multilingual fonts, and audio prompts without external memory.
ndustrial-Grade Reliability
RS485 option for long-distance noise-immune comms, wide temperature, high brightness, and G+G hardened glass that survives drops and scratches.
Offline Updates
Pop in an SD card or send files over UART – update UI without recompiling your firmware.
Flexible Orientation & Touch
Rotate screen on the fly, smooth drag-and-slide capacitive touch that feels like a tablet.
Samples
If you have a product in mind,please let us know.
MINGHUA DISPLAY CO., LTD
– Fully Customizable & Worry-Free Service
Every single detail of this 12.1 inch UART LCD display can be customized. Tell us your project – is it for outdoor agriculture, clean-room medical, or explosive-area oil & gas? Our engineers will tweak resolution, brightness (up to 1000 nits), anti-glare coating, interface (add CAN bus if you want), enclosure, or even private-label the boot logo. You'll get the perfect-fit solution at the most reasonable price – no over-spec junk you don't need.
samples
custozmied samples for serious projects.
quickly reply
48-hour BOM response.
after service
longer warranty + lifetime technical support.
fixable quantity
MOQ as low as 100pcs for custom versions
FAQ
Q: Can this 12.1 inch UART LCD display directly replace Nextion, DWIN, Stone, or TJC screens?
A: Yes, 100%. Our instruction set is 99% compatible with classic DWIN, and our free GUI designer software works almost the same. Many customers just take their old .hex files, drop them in, and it runs immediately – no need to redraw the whole UI.
Q: Will it work with ESP32, Arduino, STM32, Raspberry Pi, or PLC?
A: Absolutely. We provide complete demo code for Arduino, ESP32-IDF, STM32 HAL/CubeMX, Keil, IAR, and even Linux. You can get the demo running in under 5 minutes with just a USB-to-TTL adapter.
Q: My project is super urgent – can I buy off-the-shelf units first?
A: No problem! We keep 100+ pcs of 12.1 inch stock year-round. Most customers validate with stock units first, then move to custom versions later.
Q: Can you add CAN bus interface? Our whole system uses CAN.
A: Easy – we add a CAN transceiver or give you a complete CANopen/Modbus-to-CAN solution. Tons of EV charging-pile customers do exactly this.
Q: Will it survive heavy electrical noise (near inverters, motors, etc.)?
A: Power input has TVS + common-mode choke + three-stage filtering. RS485 version withstands ±15 kV ESD. Tested 1 meter from big VFDs – rock solid.
Hot Tags: 12.1 inch uart lcd display, China 12.1 inch uart lcd display suppliers, factory, 5 inch uart panel 720 1280, 1 39 inch oled amoled, 11 6 inch FHD lcd Screen EDP
